Home › Forums › Help/Technical Questions › Little Question about Little Big Muff

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • January 15, 2009 at 12:27 am #77544
    Dyadya Kolya
    Member

    Knobs on my little big muff are in such order: Sustain-Tone-Level (level’s not marked at all), but knobs on device from DVD (EHX Effects sampler vol.2) are in another order – Vol-Tone-Sustain – and all of them are marked. I completely satisfied with the sound, but what is the reason of that difference?? Sorry for foolish question :-)

    January 15, 2009 at 12:36 am #90745
    The EH Man
    Moderator

    Looks like there was a redesign. Maybe they printed the circuit boards backwards :doh:

    January 15, 2009 at 12:38 am #90746
    Ned Flanders
    Moderator

    Bother versions sound the same as far as I know, just a design flaw possibly with the first STV versions.

    January 15, 2009 at 12:57 am #90750
    Dyadya Kolya
    Member

    Foolish question â„–2.
    Why on the front of the box is printed Made in NYC, USA. But under the cover is Made in China. Which part of that device is from Usa??? The print about the Usa is only the part of trademark???

    January 15, 2009 at 12:58 am #90751
    electro-melx
    Moderator

    I have a backwaards one like yours..S/T/V

    I believe Scott mentioned that the first 5,000 (or something like that) were like this, then they redesigned it back the the ‘normal’ V/L/S, so it could be a collectable of the future!!

    the volume knob should be marked though, maybe the person before scraped it off or something…

    January 15, 2009 at 1:00 am #90752
    Dyadya Kolya
    Member
    Quote:
    I have a backwaards one like yours..S/T/V

    I believe Scott mentioned that the first 5,000 (or something like that) were like this, then they redesigned it back the the ‘normal’ V/L/S, so it could be a collectable of the future!!

    the volume knob should be marked though, maybe the person before scraped it off or something…

    Its impossible. I took it from the store

    January 15, 2009 at 1:06 am #90753
    electro-melx
    Moderator
    Quote:
    Foolish question â„–2.
    Why on the front of the box is printed Made in NYC, USA. But under the cover is Made in China. Which part of that device is from Usa??? The print about the Usa is only the part of trademark???

    The pedals are designed in NYC, the diecast cases are made in china (like almost all diecast cases you can buy) the circuit board is made/ part assembled off-shore in Asia, the units are assembled in NYC at the Electro Harmonix factory and tested there. (all this is as far as I know :) )

    it’s like buying a ‘made in the UK’ car….chances are the engine was part made in Germany, the electrics probably came from Asia, etc…..it’s a small world these days!

    January 15, 2009 at 1:08 am #90754
    electro-melx
    Moderator
    Quote:
    Quote:
    I have a backwaards one like yours..S/T/V

    I believe Scott mentioned that the first 5,000 (or something like that) were like this, then they redesigned it back the the ‘normal’ V/L/S, so it could be a collectable of the future!!

    the volume knob should be marked though, maybe the person before scraped it off or something…

    Its impossible. I took it from the store

    It must just be a misprint then….I’ve never seen another like it.

    January 16, 2009 at 12:03 am #90846
    Ned Flanders
    Moderator

    My green sovtek says distortion but all early ones did so.

    January 16, 2009 at 2:41 pm #90903
    Dyadya Kolya
    Member

    45d51dfc6cd5.jpg

    Thats it

  • Author
    Posts
Viewing 10 posts - 1 through 10 (of 10 total)
  • You must be logged in to reply to this topic.