Layout Photos of 1978 Electric Mistress with EH 5200-1C circuit board

[Tubedriver]

I have a 1978 Electric Mistress (two 9V) with the EH 5200-1C circuit board. I’m trying to raise this pedal from the dead and re-live some of my 70s glory years. I’m looking for layout photos of the circuit board and all connections for his version. I do have detailed photos of the EH 5100-D but it’s quite a bit different than the 5200. A good schematic would also help.

[The EH Man]

EH-5200 should be the Attack Decay pedal. Can you post some pics of your circuit board?

[Tubedriver]

The smallest I can get the file size of my photo is 90KB, wich exceeds this forum size. Provide me your e-mail address and I will send.

Thanks,
Robert

[Ned Flanders]

upload them to photobucket,then post them here.

[Tubedriver]

They are now 33KB, but the site will no longer let me post reply only fast reply. Not sure what happened. I posted fine after The EH Man. Now it will not work. Send me your e-mail address and I’ll send you the pics of the EMF 5200-1C board.

[nightraven]

go to imageshack.us and upload the photos there and then post the link to the photos in this thread so we can all see

[Tubedriver]

Thanks nightraven

Looking closely you will all notice the pot leads on the 5200 board are bent around and soldered directly to the runs on the back side of the board. Also notice the Rate and Color pots wrap around from the side of the boardbefore being soldered to the back. On the 5100 board the pot leads run through holes on the board and soldered to the back. It looks like the EMF underwent a major board revision between the 5100 and 5200. Not sure what year that would have occured. I purchased this unit new in 1978 from Music Emporium, if I remember correctly was located in NJ. Does anyone have this revision EMF and if so may I have photos of the board connections.

http://img23.imageshack.us/img23/5622/img0544uo0.jpg

[Tubedriver]

Links to more photos.

[anoush]

I just bought a1979 Electric Mistress on E-bay. It has EH 5100 D, and I think there maybe some mods done to it. Maybe I’m wrong but I can see some solder joints on the board where one of the chips is sitting. Can someone please post the pix of the EH 5100 D circuit board? I would like to compare mine to an original one. Also there is a significant volume drop when I turn the pedal on, is that normal?

[dmc777]

Bump. Anyone have one of these 5200 boards or even an original EM so I can see some gut shots? I just got one like this with the pots wrapped around the side and I’d like to try to get it fixed and figure out what the differences are. Thanks in advance.

[Author]

Posts