Home › Forums › Help/Technical Questions › Just bought the Pitchfork+. How on Earth do I set it for easy detuning ONLY?

Tagged: , , ,

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • September 17, 2023 at 6:55 pm #204609
    AtomicTacoSauce
    Participant

    So, as the title says, I can’t seem to figure out how to program a 1/2 step detune and a 1 step detune (for bass) only? I don’t need the chorus effects or anything like that, but I can’t figure out how to make easy, quick presets or whatever for those two applications. The closest I’ve come so far is that I can set SHIFT1 and SHIFT2 for a detune, but I still have to fiddle with the corresponding knobs, which is just more time wasted between songs. I know it’s not THAT big of a problem, but I’m fairly certain I can program the Plus to easily access just those two types of detunes.

    Any help is much appreciated!

    September 18, 2023 at 3:57 pm #204614
    Blue Meanie (EHX Staff)
    Moderator

    Detune is a sub-menu within each SHIFT channel, it can be used to adjust +/- 99 cents, which equates to one cent less than -m2 and +m2. You are asking about a half-step(100c) and full-step(200c), which are intervals.

    To set SHIFT 1 to half step, minor second, +/-100c
    1. Press SHIFT 1
    2. Use the VALUE encoder to scroll to -m2(half step below root) or +m2(half step above root)

    To set SHIFT 2 to a full step, major second, +/-200c
    1. Press SHIFT 2
    2. Use the VALUE encoder to scroll -M2(full step below root) or +M2(full step above root)

    Once you have DRY, SHIFT1, and SHIFT2 volume controls to your liking, press PRESET and use the VALUE encoder to scroll to a number slot that doesn’t have a “.”(empty) after the number, and save by holding down the VALUE encoder until the preset number stops blinking.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.