Home › Forums › Help/Technical Questions › Is there a way to seperate DRY level from WET level on Stereo memory man?

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • August 11, 2009 at 10:34 am #78765
    riotshield
    Member

    Is there a way to mod the SMMH so wet and dry can be controlled by 2 different pots?
    I have done some mods to the SMMH already on the record switch you can see here http://www.youtube.com/watch?v=Bh9ypxqMdi4

    August 11, 2009 at 10:55 am #100491
    nightraven
    Member

    you could always get a y-cable and run one end into the smmw/h and then into a mixer, then the other side of the y cable alongside the pedal into the mixer as well and have pots on that mixer for each channel ..?

    August 11, 2009 at 11:01 am #100492
    riotshield
    Member

    yes, thats always on option but its space consuming

    August 11, 2009 at 5:13 pm #100499
    julian
    Moderator

    I have a two channel amp and I run the SMMH into one channel, and my dry guitar into the other channel. SMMH fully wet. Channel volumes control wet/dry blend. (also I have a volume pedal after the SMMH so I can fade loops in and out and do swells)

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.