Home › Forums › Ideas / Suggestions / Feedback › Ideas for the next batch of diecast RI pedals and possible EHX pedals of the future.

Viewing 15 posts - 211 through 225 (of 231 total)
1 2 3 … 14 15 16
  • Author
    Posts
  • September 14, 2009 at 11:40 pm #101464
    ChrisFFTA
    Participant

    i would like to see some photo eye experinmentation… delay, phase, flange etc.

    September 28, 2009 at 7:00 am #101839
    hundirlaflota
    Member

    I’m thinking about a Nano LPB-2ube, or Nano English Muffin, with only one tube, or if it doesn’t fit in a Nano enclosure, the next small XO box (the Memory Boy, Little Big Muff etc. one) would be OK, something like the Zendrive II.
    Because I love EHX tube pedals but god they’re big!

    September 29, 2009 at 9:49 am #101863
    vulturepiano
    Member
    Quote:
    I’m thinking about a Nano LPB-2ube, or Nano English Muffin, with only one tube, or if it doesn’t fit in a Nano enclosure, the next small XO box (the Memory Boy, Little Big Muff etc. one) would be OK, something like the Zendrive II.
    Because I love EHX tube pedals but god they’re big!

    i second this.

    September 30, 2009 at 12:19 am #101907
    Chumley
    Participant

    Would indeed be awesome.

    February 14, 2010 at 2:04 pm #107494
    Haino
    Member

    how about a delay pedal called the Seagull with all of that stuff you guys are talking about.
    its based on a vcs3 and an SMMH combined! wait till i start designs id love to show everyone this thing.

    Haino

    February 15, 2010 at 7:18 am #107521
    grant2play
    Member

    We desparately need XO versions of the small stone and the bad stone.

    February 15, 2010 at 9:00 am #107522
    TenSecondTed
    Member
    Quote:
    We desparately need XO versions of the small stone and the bad stone.

    A bit like this??
    https://www.ehx.com/products/small-stone
    :facepalm:

    February 15, 2010 at 9:39 am #107523
    grant2play
    Member
    Quote:
    Quote:
    We desparately need XO versions of the small stone and the bad stone.

    A bit like this??
    https://www.ehx.com/products/small-stone
    :facepalm:

    I have a nano SS, but I dont like input output jacks directly mounted on the pcb.

    February 15, 2010 at 11:19 pm #107540
    julian
    Moderator

    Xo pedals have jacks directly mounted on the PCB as well.

    February 16, 2010 at 6:31 pm #107568
    Haino
    Member

    hmm still thinking of ideas guys, i agree with the input/ outputs on the pcbs
    but im thinking the small stone should be modelled after the xo memory boy
    not the pocket one but the larger one and it should have a feedback nob and a tingle distortion switch to go with it.

    i havent figured out my photoshop program to fully design some of these pedals but i can probably design one on paper and scan it and then send it to you guys.

    good luck gentlemen.
    take care.
    Haino

    February 16, 2010 at 6:57 pm #107569
    Mr.Grim
    Member

    dude that screaming mole muff isn’t to for fetched, i mean i honestly don’t see EH producing them any time soon, but for DIY’ers out there why not? i am currently in production of a project i mentioned in another post that i called the “short bus” that when completed (soon) i will unveil here in these forums. its basically the same idea but based on different effects than what you mentioned.

    and also in reply to ChrisFFTA i am in production of a photo eye expression pedal (usable with most if not all pedals with an expression out jack) that i will eventually sell on ebay, as i see that no one is currently in production of one, but i see a couple people would like to use one and dont know how to make one.

    February 16, 2010 at 11:48 pm #107601
    julian
    Moderator

    Mr. Grim, if you use two photocells and wire one from TIP to RING and one from SLEEVE to TIP, it will work a lot better than just using one. You’ll get a much much better range.

    February 17, 2010 at 4:54 am #107611
    Mr.Grim
    Member

    thanks Julian, but i have all ready tested that idea and it is being implemented in a deluxe version with more controls.

    February 17, 2010 at 5:27 am #107612
    julian
    Moderator

    neat

    What photocells are you using?

    I use photocells in the aforementioned set-up for digital to analog conversion for a pedal I’ve been designing. I was using Silonex TO-5, but I’m going to try out the 10k Futurlec ones and see if I can get the same range with them.

    February 17, 2010 at 6:33 pm #107626
    Haino
    Member

    WOW IS THAT PEDAL SOME KIND OF OPTICALLY CONTROLLED PEDAL USING YOUR EYE AS MOVEMENT TO CHANGE YOUR SOUND?
    COOL OR AM I WAY OFF BASE HERE?
    hAINO :freak:

  • Author
    Posts
Viewing 15 posts - 211 through 225 (of 231 total)
1 2 3 … 14 15 16
  • You must be logged in to reply to this topic.