Home › Forums › Help/Technical Questions › I need a new power adapter for my Memory Boy which one is it?
- This topic has 10 replies, 6 voices, and was last updated 14 years, 5 months ago by Flick (EHX Staff).
-
AuthorPosts
-
March 13, 2010 at 7:01 am #80016InvaderCCMember
My power supply went dead after 37 days after date of purchase so i can not take it back…Which is the correct power supply number?I can not find one list for 45ma 9volt center negative…
March 13, 2010 at 12:07 pm #108453The EH ManModeratorYou can use one w/ a higher mA rating as long as the voltage and polarity are correct.
March 13, 2010 at 6:57 pm #108462InvaderCCMemberQuote:You can use one w/ a higher mA rating as long as the voltage and polarity are correct.Thanks that is were the confusion came in i see they have one listed as a 55ma 9vDC..But not the 45ma thanks again for the help…
March 15, 2010 at 8:11 pm #108548Flick (EHX Staff)ModeratorQuote:My power supply went dead after 37 days after date of purchase so i can not take it back…Which is the correct power supply number?I can not find one list for 45ma 9volt center negative…This one:
Or you could use a 1 Spot.
March 20, 2010 at 2:36 pm #108661rocker_71MemberQuote:Quote:My power supply went dead after 37 days after date of purchase so i can not take it back…Which is the correct power supply number?I can not find one list for 45ma 9volt center negative…This one:
Or you could use a 1 Spot.
Hi there, newby alart here.. :thumb:
Is it possible to power the Memory Boy with a 1Spot (or in my case: Cioks Big John)??
That would be nice.
Just a normal Boss style (center negative) plug?March 20, 2010 at 4:00 pm #108665ToonsterMemberAs Flick says: you can use a 1spot, don’t know of the Big John, but as long as it is 9v and has enough mA it would do the work!
March 20, 2010 at 4:12 pm #108669rocker_71MemberQuote:As Flick says: you can use a 1spot, don’t know of the Big John, but as long as it is 9v and has enough mA it would do the work!The Big John is sort of a luxe 1Spot (more like the voodoo lab pedal power).
I just wanted to verify if there aren’t any negative site-effects when hooked up a shared power supply. I also read a post that there will be negative impact on your effects chain when no seperate power supply is used for the Memory Boy.
March 20, 2010 at 4:31 pm #108671ToonsterMemberThe Big John has 600mA output power (googled that), so as long as your pedal rig is underneath that, you will have enough power and no problems..
March 20, 2010 at 9:35 pm #108678Bad ChileParticipantQuote:I just wanted to verify if there aren’t any negative site-effects when hooked up a shared power supply. I also read a post that there will be negative impact on your effects chain when no seperate power supply is used for the Memory Boy.In intentionally run my Memory Boy off a G-bus 8 supplying only 9.0 Volts instead of the 9.6 Volts that the Memory Boy power adaptor supplys. I find I can get longer delay times (at the expense of fidelity) with the lower voltage.
The G-bus 8 supplies 1700 mA, which is plenty for my system.
March 23, 2010 at 9:25 pm #108759rocker_71MemberQuote:Quote:My power supply went dead after 37 days after date of purchase so i can not take it back…Which is the correct power supply number?I can not find one list for 45ma 9volt center negative…This one:
Or you could use a 1 Spot.
just checking … for Europe it must be this one?
http://www.thomann.de/gb/electro_harmonix_eu96_dc200_bi_netzteil.htm
March 24, 2010 at 4:26 pm #108777Flick (EHX Staff)ModeratorQuote:Quote:Quote:My power supply went dead after 37 days after date of purchase so i can not take it back…Which is the correct power supply number?I can not find one list for 45ma 9volt center negative…This one:
Or you could use a 1 Spot.
just checking … for Europe it must be this one?
http://www.thomann.de/gb/electro_harmonix_eu96_dc200_bi_netzteil.htm
That’s the correct adapter.
-
AuthorPosts
- You must be logged in to reply to this topic.
