Home Forums Help/Technical Questions Holy Grail Reverb large tin case

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • #81220
    bjgiff
    Participant

    Just got a Holy Grail Reverb with the large tin case. I assume this is an older one. No battery box.
    I bought it used.
    I plugged it in to my pedal board and it is making a high frequency noise. Doesn’t seem to get along very well with my other pedals inline. I am not using the power supply that comes with it. I am running it inline with the same power supply as the other pedals.
    thanks

    Bill

    #113660
    The EH Man
    Moderator

    It requires a good chunk of current so that might be part of your problem. What kind of power supply are you using?

    #113661
    bjgiff
    Participant

    Godlyke 2000mA

    #113662
    The EH Man
    Moderator

    Depending on what else you have on it, it should work. Have you tried power the HG by itself?

    #113663
    KartoonHead
    Member

    If pedals are acting strangely when you use them in-line with other pedals try sticking it in the FX loop of your amp.

    #113664
    bjgiff
    Participant

    Seems ok alone. Put it in the chain and I get noise. Take it out, no noies.
    Like it doesn’t get along with the other pedals.

    #113665
    bjgiff
    Participant

    No effects loop

    #113667
    Cryabetes
    Participant

    try powering it seperately. The older HG’s don’t like being daisy chained.

    #113718
    bjgiff
    Participant

    Thanks I’ll try that!

    #113720
    bjgiff
    Participant

    Thanks
    Tried the seperate power supply and it quieted down!

Viewing 10 posts - 1 through 10 (of 10 total)
  • You must be logged in to reply to this topic.