- This topic has 2 replies, 2 voices, and was last updated 15 years ago by .
Viewing 3 posts - 1 through 3 (of 3 total)
Viewing 3 posts - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.
Home › Forums › Help/Technical Questions › Holier Grail Help
Hi there,
I have a Holier Grail pedal – after about 5 minutes or so of being plugged in, it starts buzzing and the signal is cut – however when I put the pedal in bypass mode, it seems to work fine (i.e. the clean signal is fine).
Would this more likely be a problem with the power supply, or the pedal itself? Once I unplug the power supply and then plug it in again, the pedal works fine, but then after a couple of minutes the problem reoccurs.
Many thanks for your help in advance.
Alex Shields
I would try a new power supply. If the problem persists, it could be a poor solder joint somewhere in the power supply section of the pedal.
Many thanks!