- This topic has 18 replies, 5 voices, and was last updated 8 months, 3 weeks ago by .
- You must be logged in to reply to this topic.
Home › Forums › Help/Technical Questions › Help please, my 95000 right channel cuts in and out after Firmware update
Thanks you
Are you using the original power supply that the 95000 came with?
Do you hear the right input if you remove the cable from the Headphone Output jack?
This is the power supply it came without u
Dear all,
I am wondering whether you managed to resolve this problem? I am having the same issue I think: The left channel of the dry output does not give any signal,
even though it is correctly recording everything in stereo, and the output of the recorded loops in stereo also works. When I turn down the fader of the left dry output, and then turn up the fader of the left one, the signal from the left channel slowly fades in until a still relatively low level (much lower than R channel), but when I turn up the R fader again, the left input will slowly disappear completely.
I tried different synthesizers, cables, power supplies, (formatted) SD cards, and updated the firmware.
Thanks a lot in advance!
Please write the techs at info@ehx.com