Home Forums Help/Technical Questions Germanium OD volume problem

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #78144
    vulturepiano
    Member

    The pedal has lost a lot of it’s volume and drive. When I turn the gain below 5, there is almost no output. And at almost everything setting it sounds like the volts knob is turned almost all the way down, even when turned all the way up to 9v. I’ve tried using both a battery and an adapter. I’ve also placed it before and after pedals in my line and I’m still getting the same problem. Any ideas what’s wrong?

    #96240
    vulturepiano
    Member

    buuuuump

    #96256
    MING
    Member

    Where are the bias and volts knobs set? When they get too far apart. The pedal will cut out.

    Read this thread. Does your problem sound like this? The one stated in the first post.
    https://www.ehx.com/forums/viewthread/570/

    #96262
    vulturepiano
    Member

    my problem is that when all the knobs are dimed, there is hardly any output or drive. it sounds as if the volts knob is turned almost all the way down, even when all the way up.

    #96263
    MING
    Member

    Sorry, don’t know what is up with that.

    Give it time. There are some pretty “techie” guys around here. That may be able to help.

    Have you tried emailing EHX?

    #96304
    vulturepiano
    Member

    i just e-mailed ehx yesterday. i’m sure it’ll get fixed. if not i’ll just grab another one. thanks for the help

Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.