Home › Forums › Ideas / Suggestions / Feedback › Freeze mod

Viewing 2 posts - 16 through 17 (of 17 total)
1 2
  • Author
    Posts
  • February 26, 2020 at 11:17 am #125859
    sonotor
    Member

    Hi.
    Finally I dit!
    I have a perfect wet out without any dry signal on my freeze ehx!
    Not a piece of cake to find how to do that.
    The problem was that the pcb of my freeze pedal was different from what I’ve seen on the web.
    Everybody was talking about R3 to have the wet signal but it didn’t work for me!!!!
    If you have the same pcb on your ehx freeze pedal the wet signal point is on R35.
    Check the pictures to do the same mod.
    There is another problem, once you have the signal coming fromR35 you have to add a cap and a resistor to stop a bd dc signal.
    Defore I did that there was a low short click/pop sound when I was recording the signal from the wet output coming from my mod on my looper.
    I’ve added a cap and a resistor and now it’s work like a charm!

    Have a look on the pictures and you will now how to do that. really easy if you know how to solder.
    Good luck and enjoy!
    I hope it will help you.

    https://www.diystompboxes.com/smfforum/index.php?topic=113948.msg1173605#msg1173605

    March 2, 2020 at 11:49 am #125883
    Antman
    Participant

    If you want to effect the drone only I’d suggest you get the Plus Pedal by Game Changer Audio. This pedal has the exact functionality you are describing built in. It has an effects loop for effecting the drone note, but even better you can freeze up to 5 layers of sound at once. I used one for a friends pedal board build and it worked perfectly. We ran a modulated reverb on the drone note and it sounded amazing.

  • Author
    Posts
Viewing 2 posts - 16 through 17 (of 17 total)
1 2
  • You must be logged in to reply to this topic.