Home › Forums › Help/Technical Questions › electro harmonix micro synth problem with effects chain

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • January 5, 2010 at 5:19 pm #79638
    litio76
    Member

    hi everybody!

    i’ m an italian owner of a brand new Micro synth by EH.
    i need help, with my actual chain effect

    my effects are,

    whammy – cry baby – tube factor – line 6 dl4 – fish and chips eq.

    i put all my pedals on a warwick pedalboard.

    this is the problem:

    if i put the micro synth at the end or at the start of this chain, when i turn it on, the sound turn off and no synth sound come from pedal.

    what can i do ? anyone know this problem and the resolution ? i’ ve also try to connect micro synth qith boss line selector, but when i turn in on, any sound dosen’t come out from the amplifier

    thanks to all, and sorry for my english!!

    bye!
    Giorgio

    January 5, 2010 at 5:38 pm #106089
    litio76
    Member

    hi,

    thanks for the reply.

    if i use only the microsynth between guitar e amp, it work with no problem.

    if i don’t use the whammy and the wah it work… you thik is possible a probem with the trim inside ? i put it at the maximum cloakwise.

    i try also to use a boss line selector for a second indipendent chain, the pedal work whit

    guitar — line selector — ampli

    if i try to put in a line selector the other pedals 8 in a different line ) the pedal stop working.

    i suppose there’s a problem with something come to strong into the microsynth that stop is right work.

    thank for any suggestion!

    Giorgio

    January 5, 2010 at 8:30 pm #106104
    BlueSteel
    Participant

    well, i have a crybaby and a microsynth, and it works fine before and after the wah, so its not that, it might be the whammy, but i dont know why. it could be the trim inside. theres instructions that came with the microsynth that tells you how to set it at the right point, try that and see what happens i guess.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.