Home › Forums › Help/Technical Questions › Electro Harmonix DRM-32 synchronization CLOCK OUT

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • January 17, 2010 at 10:56 pm #79710
    Guidance
    Member

    Hello,
    I got a used DRM-32 a few days ago, wonderful machine!!! :-)

    Question: What gear (good working, and, if possible, also cheap) do I need to synchronize the DRM-32 with the other parts of my midi equipment (via the “CLOCK OUT”, that’s obvious, but ..)? If it’s equipment that is no longer produced please also tell it – maybe I can get some older stuff via Ebay. I own a M-Audio Midisport 2*2, but that one is not the solution, I think ..

    What kind of signal is that “CLOCK OUT” at all? Is it the same as “WORD Clock out”? Or even just a usual “Midi Clock”-signal? I’m not familiar with that sort of technical stuff, as you can see :-/

    Thank you for your help, bye,
    Guidance

    January 17, 2010 at 11:20 pm #106529
    The EH Man
    Moderator

    All it says in the manual is that it’s a pulse signal. It gives no specs.

    January 18, 2010 at 9:05 am #106549
    Guidance
    Member

    Hi Ron, thanks for the answer! My DRM-32 didn’t come with a tutorial ..

    You don’t know gear that changes that “pulse” into a “Midi Clock”-signal so I can synchronize the DRM-32 with (for example) my Ableton Live sequencer?

    Thanks, bye,
    Guidance

    January 18, 2010 at 11:58 am #106550
    The EH Man
    Moderator

    Everything I know about MIDI could be written on my fingernail in 24pt type so I’m no help there. I’d try over at one of the keyboard forums.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.