Home › Forums › Help/Technical Questions › Ehx Magnum 44 – earth connection

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • October 30, 2015 at 9:05 am #84136
    Nyarlath
    Member

    Hello,
    I recently bought a Magnum 44 (brand new one from a well-know European store), and I’m facing some hum that decreases when touching the guitar strings (typical ground issue).

    I checked the ground connection in all my 3 guitars and they are ok.

    Regarding the Magnum 44, I noticed that the power adapter cord has the earth pin and I supposed it was connected to the GND pin of 24V output. Checking with a tester, it results not connected. Is this correct or is my power supply faulty?

    Thank you!

    December 22, 2015 at 10:20 am #121112
    Apan Pierre
    Participant

    As “friedjesseradio” said in an earlier post: https://www.ehx.com/forums/viewthread/6167/#35128

    Put a wire fr chassi of 44 to ground in your power outlet. Hum problem fixed,
    /Pierre
    :-)

    January 2, 2016 at 9:16 am #121142
    MattTheCat
    Member
    Quote:
    As “friedjesseradio” said in an earlier post: https://www.ehx.com/forums/viewthread/6167/#35128

    Put a wire fr chassi of 44 to ground in your power outlet. Hum problem fixed,
    /Pierre
    :-)

    Hi Pierre, I need to do this too! can you post a picture to show exactly where to put the wire?

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.