Home › Forums › Help/Technical Questions › EH Nano Power Adapter Query

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • December 29, 2016 at 11:20 pm #84716
    JoGTR
    Member

    Hi,

    I just purchased a EH Nano 360 Looper pedal, and need to purchase power adapter, but I already have a spare Boss PSA-240S power adapter with the following specs:

    PSA-240S

    250mA

    Input: 100 – 240v, 240mA

    Output: 9v 0.5A 4.5W

    See attached photo for polarity set-up.

    My question is, would this suitable to use with Nano 360 or do I need to the still purchase the proper power adapter for the Nano 360?

    Thanks in advance.

    December 29, 2016 at 11:34 pm #122418
    EHX STAFF
    Keymaster

    That should be just fine.
    I bet you have the PSA-240
    The PSA-240S is a 500ma supply
    Both are great to use with the 360.

    December 29, 2016 at 11:43 pm #122420
    JoGTR
    Member

    Thanks for the reply and info. That is strange, I definitely have the PSA-240S and it clearly states 240mA not 500mA?

    December 29, 2016 at 11:51 pm #122421
    EHX STAFF
    Keymaster

    Yes I think you are correct. i looked again and some internet stores have them miss marked.
    Maybe the PSA120s is the 500ma one.
    In any event your good to go.

    December 29, 2016 at 11:57 pm #122422
    JoGTR
    Member

    Thank you for that, much appreciated.

    January 23, 2017 at 8:56 am #122529
    HansUrmann
    Member

    According documentation for NANO LOOPER 360 the current draw is 90mA.
    Your power supply PSA-240S can provide 250mA.
    So, I can’t see any problems!

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.