Home › Forums › Help/Technical Questions › Double MUFF is not working!! :(

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • December 9, 2009 at 1:20 am #79488
    iheartehx
    Member

    Okay, I bought this Double Muff pedal Used almost a month ago and all of a sudden the bastard stops working for me. I don’t know how to fix pedals, so if anyone could give me some technical advice on how to do it, that would be awesome.

    I seem to have a loose input though, but I’ll post some photos, so you can have a look inside.

    *If you need more/better photos, just tell me and I’ll post more. Thanks in advance guys, this forum really helps a lot!

    2lj4yuh.jpg

    INPUTS
    kd6du1.jpg

    the problem is on the RIGHT side
    2n99t3d.jpg

    another pic
    2z5n137.jpg

    I just found another problem :(
    4jxmq8.jpg

    December 9, 2009 at 3:05 am #105046
    iheartehx
    Member

    Can anybody help me???

    December 9, 2009 at 5:38 am #105052
    Mr.Grim
    Member

    well i cant tell without having the unit in my hands but my guess from here would be:

    just re-solder the loose blue wire to the connection tab with the solder on it (but no wire) on the jack.

    December 9, 2009 at 11:40 pm #105100
    SanquiFlerb
    Member

    I can’t explain where it should go, but if you understand what grim said, then you should be fine. Anyways, here it goes: On the third picture there is a 1/4 plug inserted on the pedal. The tip of it, touches a long metal thing from the jack. Follow it to where it ends, on the other side there is the same piece of metal but with a hole on it. There you should solder the wire.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.