Home › Forums › Help/Technical Questions › Distortion on high frequencies only

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • February 25, 2010 at 10:03 am #79933
    atlanta
    Participant

    Hi all,

    I was wondering if it was possible to combine several pedals to get distortion only on high frequencies ?
    Also I’d like to get distortion only on feedbacks signal of a reverb (I use a cathedral stereo reberb), leaving the dry signal clean.

    any ideas ?

    thanks!

    February 26, 2010 at 9:25 am #107955
    atlanta
    Participant

    ok thanks mate!
    What’s the better way to split a signal ?

    February 26, 2010 at 7:31 pm #107968
    julian
    Moderator

    I have several pedals with wet/dry/stereo outs, so that’s usually how I split it.

    but yeah, what I would do is to split the signal before the Cathedral, set the Cathedral fully wet, then have a high pass filter followed by a distortion after the Cathedral.

    Then recombine the dry and wet either at the amp if you have multiple channels that can run at the same time, or with a mixer.

    March 4, 2010 at 3:00 pm #108166
    atlanta
    Participant

    thank you both :)

    March 6, 2010 at 3:38 am #108224
    Haino
    Member

    man you guys are smart i think i will try that out at the music store
    to see what happens.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.