Home › Forums › Help/Technical Questions › Deluxe Memory Boy No Wet Signal

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • August 18, 2012 at 11:12 pm #82521
    Jazz Noise
    Member

    Hi

    First of all my 9.6 EHX adaptor that came with my DMMB died, which I found odd. So I got a new 9.6v supply on Amazon from a guy called Digidave, I measured the output (9.6, what a surprise) and was using it happily for a couple of weeks.

    Only yesterday I turn it on and there’s no delay signal, regardless of feedback level – the clean signal passes fine and all the LED’s work. The onboard PIC must be fine as the tap tempo, delay sequencer and modulation would all seem to trigger the LED’s accordingly.

    So I’m assuming it’s the BBD stage! Is there any hope of getting this fella repaired?

    August 19, 2012 at 10:16 pm #118018
    The EH Man
    Moderator

    Try reseating the delay IC board.

    September 6, 2012 at 4:44 am #118113
    joemcnertney
    Member

    i have the same issue. i reseated the board and still no luck.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.