Home › Forums › Help/Technical Questions › Deluxe Electric Mistress

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • July 6, 2009 at 11:14 am #78537
    iggypop
    Member

    Hello,

    my EHX Deluxe Electric Mistress (the reissue) is acting a little strange. It gives a clock/click sound when flanging and even when it’s on Filter Matrix. “Clicking” sound comes in same time as the rate is set.

    Anyone knows how to fix that? It’s only about 3-4 years old and I bought it new.

    THanks,

    Iggy

    July 6, 2009 at 3:44 pm #98934
    julian
    Moderator

    I’d say that a trimpot has probably drifted out of alignment. I’m not sure if it’s something you can fix by yourself (you need an oscilloscope to adjust some trimpots) but if you can, I’m sure EHMan will drop in here and explain how.

    July 6, 2009 at 4:30 pm #98936
    iggypop
    Member

    Thanks for your help. I don’t have an oscilloscope and I am not an expert on electronics.
    But I hope I get some further help.

    /Iggy

    July 9, 2009 at 2:39 pm #99126
    Johnny Halo
    Member

    I am having the same issue as well. The ticking/clicking speeds up as I increase the rate knob.

    I was thinking, perhaps, it could be something to do with the power supply? i.e. not enough power/milliamps/amps? I am using the EH 24 volt power supply.

    Thanks.

    July 9, 2009 at 4:49 pm #99131
    iggypop
    Member

    Yes, but I have a deluxe memory man also with the same power adaptor and I have tried to change it with the same result… So I guess that’s not the issue.

    July 9, 2009 at 8:58 pm #99142
    julian
    Moderator

    You could send it into EH for repair. They charge a small flat fee for out of warranty repairs.

    July 9, 2009 at 9:27 pm #99145
    iggypop
    Member

    Yes I guess I could but I live in Stockholm, Sweden. It would cost some money for the postage/handling plus repair.

    July 21, 2009 at 7:50 pm #99802
    Johnny Halo
    Member

    Any ideas on this one?

    July 21, 2009 at 9:11 pm #99809
    julian
    Moderator

    there is a repair facility in Germany you could send it to http://www.newsensor.com/CutomerServices.aspx

  • Author
    Posts
Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.