[Contains Photo] Onespot / Power source for discontinuted? Bass Balls & Mini Q-Tron – Electro-Harmonix

This topic has 2 replies, 2 voices, and was last updated 8 years, 4 months ago by ConsMagic.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
July 18, 2016 at 10:15 pm #84499

ConsMagic
Participant

I dug through a few posts with no luck. Will doing this actually fry either pedal?

Onespot, 2 x 3.5mm converter ‘CS35’ for Electo-Harmonix and other old style pedals to power both.

Here is a photo of the two pedals in question:
http://tinypic.com/r/efrmeu/9

Or is the battery clip converted ‘CBAT’ safer…

Thank you for taking the time
C

July 20, 2016 at 8:52 pm #121744

Flick (EHX Staff)
Moderator

It shouldn’t be a problem to use the 3.5mm converter attached to a 1Spot for both older style pedals. The correct polarity for the 3.5mm plug is TIP POSITIVE. If the polarity of the 3.5mm plug is wrong it could damage the pedals so make sure tip is positive before plug them in.

July 20, 2016 at 8:53 pm #121745

ConsMagic
Participant

AWESOME!!!! I am so glad it is even a possibility they won’t be fried. I will check the polarity as best I can . Thanks again!
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.