Home › Forums › Help/Technical Questions › connecting pedals

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • February 18, 2010 at 5:10 pm #79902
    terry cannon
    Member

    What is best to do to connect Qtron plus with Flanger hoax?I want to use both into a small amp.I am having some results but very hissy,is it the cable quality or the order and direction of my connections?Ta. :freak:

    February 18, 2010 at 5:21 pm #107671
    TheCapitalJ
    Member

    which qtron big box or xo?

    It might be the connections, my patch cables are quite cheap and they are great no hum what so ever

    February 19, 2010 at 7:35 am #107703
    electro-melx
    Moderator
    Quote:
    hey, i was wondering if those connector cables (like 3 inches of male-males connection with no rubbery middle) would have any problem?

    unless you have a row of identical pedals they don’t really work…

    .. they are OK on boss-boss but I wouldn’t use them on anything else.

    February 21, 2010 at 1:50 pm #107739
    TheCapitalJ
    Member

    What like couplers? I was thinking of those for big muff tone wicker boss tu-2 and nano small stone.

    February 21, 2010 at 3:31 pm #107742
    TenSecondTed
    Member
    Quote:
    hey, i was wondering if those connector cables (like 3 inches of male-males connection with no rubbery middle) would have any problem?

    I use those.

    The ones I have are by Rotosound and are basically 2 male plugs stuck together. They are great for me as I have a lot of similar EHX XO pedals in a line. There is only a 2 cm gap between my pedals. For pedals that don’t line up I use those patch cables with the ‘squashed’ flattened ends.

    When i finally get round to building a decent pedalboard/case, it will be the tidiest one in the world!

    February 21, 2010 at 4:11 pm #107743
    Fender&EHX4ever
    Moderator

    The Flanger Hoax is notoriously noisy. It’s a brilliant pedal, but the hiss is unavoidable. The only method that has worked for me is to put a graphic EQ after it and pull down the bands around 8k and 16k.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.