- This topic has 3 replies, 2 voices, and was last updated 6 years, 10 months ago by .
Viewing 4 posts - 1 through 4 (of 4 total)
Viewing 4 posts - 1 through 4 (of 4 total)
- You must be logged in to reply to this topic.
Home › Forums › Help/Technical Questions › Cock Fight mod
Hi,
Anyone knows how to mod the Cock Fight to allow using the fuzz independently?
Thanks.
Best,
Shant
You can set the controls so the wah is near flat or out of the circuit.
Start here with the settings
Volume 1 o’clock
Frequency all the way up
Tone 9 O clock
Drive 0
Bottom 2 oclock
Bias all the way up
The Manual mentions:
FUZZ ON/OFF Switch – On the PCB there is a small DIP switch that changes
FUZZ OFF to FUZZ THROUGH mode. In FUZZ THROUGH mode the filter section
is bypassed and removed from the signal path. In this mode the knobs FREQ,
BOTTOM and switch CRY/TALK have no effect on the sound.
Does this mean that the FUZZ can be used independently in this mode?
Thanks.
Recent production boards have this new internal switch in which you can use the fuzz with out the wah.