Home › Forums › Help/Technical Questions › clock input on vintage DRM 32

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • January 8, 2010 at 5:04 pm #79662
    kovicvu
    Member

    is it possible to make a clock input instead of clock out or bass out on DRM32( some DRM15 models have it )?

    January 8, 2010 at 8:48 pm #106223
    julian
    Moderator

    Well anything’s possible.

    On those guys there is probably a gate signal being generated in the circuit. If you could figure out where to cut that gate signal and replace it with your own, it’d be pretty easy. If you want a midi-clock in, then you’d need to get a midi to gate converter.

    January 10, 2010 at 3:59 pm #106286
    kovicvu
    Member

    i just need simple clock IN(without MIDI capability).
    it’ll be helpful if someone have schematic of DRM 15(with clock IN),or better:
    if someone have DRM 15 (with clock IN)and will be ready to take picture of PCB and related jack.

    January 22, 2010 at 8:10 pm #106725
    Guidance
    Member

    Hi,

    I have the same problem: If anybody can provide a schematic diagram of the DRM-32 (or of the DRM-15 or the DRM-16) via download I am realy happy to start the same modification on my DRM-32! :-)

    Thanks a lot,
    Guidance

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.