Home › Forums › Help/Technical Questions › Cathedral – Pedal Power 2?

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • May 17, 2010 at 11:53 am #80219
    beforewewerevoices
    Participant

    Hi,

    The Cathedral manual states –

    “Plug the output of the Cathedral’s supplied AC Adapter into the 9V power jack located at the top of the Cathedral. The Cathedral requires 9 – 9.6VDC at 200mA with a center negative plug. The Cathedral accepts Boss style AC Adapters.”

    Do you know if this means the Pedal Power 2 + can power the Cathedral? The individual outputs on the PP2 are rated at 100mA (too low) and the Line 6 Outputs are rated at 250mA (too high).

    Thanks

    Simon

    May 17, 2010 at 12:01 pm #98046
    WeeGav
    Member

    Hey,

    I think pedals that have a higher current requirement go into outputs 5 and 6 on the PP2. For Line 6 pedals you would move the DIP switches away from normal. I may be wrong though …

    Thanks,
    Gav

    May 17, 2010 at 2:23 pm #98038
    Flick (EHX Staff)
    Moderator
    Quote:
    Hi,

    The Cathedral manual states –

    “Plug the output of the Cathedral’s supplied AC Adapter into the 9V power jack located at the top of the Cathedral. The Cathedral requires 9 – 9.6VDC at 200mA with a center negative plug. The Cathedral accepts Boss style AC Adapters.”

    Do you know if this means the Pedal Power 2 + can power the Cathedral? The individual outputs on the PP2 are rated at 100mA (too low) and the Line 6 Outputs are rated at 250mA (too high).

    Thanks

    Simon

    As long as the power supply’s current rating is 200mA or higher it will be fine. So the 250 mA outputs from the Pedal Power 2 should work.

    May 17, 2010 at 5:56 pm #109327
    SanquiFlerb
    Member

    https://www.ehx.com/forums/viewthread/2957/ check that out!

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.