i’m not quite sure what they meant when they said that the cathedral is true stereo.

i thought left and right outputs would be separated when both left and right inputs were plugged in.

i run a 2 amp set up. one is my dirty amp and one is my clean amp.
i wanted the reverb to trail off when i switched between the amps
so i placed the cathedral after my AB pedal and had A go to L input and B go to R input on the cathedral.
when i switched between the amps, i was still able to hear the guitar on both amps which bothered me a lot.
seems like the signal is mixed in the middle. so even if no signal is going to one of the inputs,
both outputs send signal out.

is there a way to separate the signals within the pedal, like a mod i can get done?
i really like the way the cathedral sounds but i would like it if it actually worked the way i thought it did.

thanks.