Home › Forums › Help/Technical Questions › Can the Micro POG or POG2 be modded so that…

Viewing 14 posts - 1 through 14 (of 14 total)
  • Author
    Posts
  • June 29, 2009 at 3:40 am #78496
    DualEnded
    Member

    Each octave has its own, 100% wet output jack? Like, say, the Micro POG having one output jack for the dry signal, one for the “Sub Octave” and one for the “Octave Up”?

    June 29, 2009 at 9:02 am #98566
    DualEnded
    Member

    No-one? :(

    June 29, 2009 at 4:59 pm #98590
    DualEnded
    Member

    Okay…did I ask something that’s absurdly stupid?! :poke:

    June 29, 2009 at 5:54 pm #98592
    julian
    Moderator

    I’m not absolutely sure.

    If the DSP is constantly emitting all of the voices, and the sliders just act as a mixer, than yes, it would be possible.

    If the DSP has one output and mixes it itself based on what the sliders are set on, than no, not possible.

    It’s probably designed the latter way.

    June 29, 2009 at 5:57 pm #98593
    Island3r
    Member

    Maybe buy 3 MicroPogs?
    ;)

    June 29, 2009 at 11:47 pm #98611
    DualEnded
    Member
    Quote:
    Maybe buy 3 MicroPogs?
    ;)

    Sure! As long as you’re paying, I wouldn’t mind buying 4 or 5 POG2s. :P

    June 29, 2009 at 11:54 pm #98612
    julian
    Moderator

    Even if it is possible to do, I’d think it would be very hard to do, SMD boards are really hard to mod. There are some people who do it, but personally I wouldn’t.

    I think the best thing would be to put one of these after it: http://www.activemusician.com/item–EM.RLL-SX21

    July 1, 2009 at 12:56 pm #98705
    The EH Man
    Moderator

    Without seeing a schematic I can’t say for sure but theoretically, if each octave has it’s own output from the DSP it should be possible for each to have it’s own output. I would add a buffer to each output to isolate the DSP.

    July 1, 2009 at 5:38 pm #98711
    DualEnded
    Member

    Okay then, is it possible to get a one-off done for me from EHX?

    July 1, 2009 at 5:45 pm #98712
    The EH Man
    Moderator

    Probably not. I don’t think they do too much custom stuff.

    July 1, 2009 at 6:04 pm #98715
    julian
    Moderator

    yeah, if it’s possible, you’d have to have a 3rd party do it.

    July 1, 2009 at 8:43 pm #98726
    DualEnded
    Member

    Dang! I was starting to think that, in case of the POGs, the signal processing was entirely programmed inside the DSP, and so the only way to even get around to mod the pedal would be somehow edit the code inside the DSP. Hence the question of whether EHX would wanna do a one-off. :(

    July 4, 2009 at 10:31 pm #98897
    The Tone God
    Member

    When I modded my uPOG I derived that the octave controls adjusts only a voltage which tells the DSP how much octave to add on it’s output. They are not analog mixing controls. The Dry control is an analog mixing control. The DSP only has the one output thus the octaves cannot be split to have different outputs.

    Sorry.

    Your Tone God,

    Andrew

    July 5, 2009 at 3:20 am #98902
    julian
    Moderator

    thanks for that bit of info TTG! I figured as much.

  • Author
    Posts
Viewing 14 posts - 1 through 14 (of 14 total)
  • You must be logged in to reply to this topic.