Can OD pedals handle less than 9v? – Electro-Harmonix

This topic has 1 reply, 2 voices, and was last updated 5 years, 11 months ago by mahdi.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
December 29, 2018 at 3:20 am #85610

xkjacob.king
Member

Good evening, I hope the holidays find you well.

I was wondering if OD pedals can handle lower than 9v.

I have an mxr isocomp that let’s me dial down the voltage. I’ve played with the DOD gunslinger and it can handle anything at or under 18v. Dialing down the voltage is found on the Germanium OD and that’s a neat effect.

If it isn’t recommended That’s fine. I have a small collection of EHX OD and thought this might be another avenue I could experiment with.

Thanks

December 30, 2018 at 4:53 pm #124670

mahdi
Member

Quote:

Good evening, I hope the holidays find you well.

I was wondering if OD pedals can handle lower than 9v.

I have an mxr isocomp that let’s me dial down the voltage. I’ve played with the DOD gunslinger and it can handle anything at or under 18v. Dialing down the voltage is found on the Germanium OD and that’s a neat effect.

If it isn’t recommended That’s fine. I have a small collection of EHX OD and thought this might be another avenue I could experiment with.

Thanks

if a fuzz do then an od does too , and the best example would be the : Maestro FZ-1 , it was run on two batteries of 1.5v
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.