Home › Forums › Help/Technical Questions › big muff pi w/tone wicker — can you use the original big muff power supply?

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • April 29, 2009 at 8:32 pm #78158
    diblet
    Member

    just wondering if you can you use the original big muff power supply on the big muff pi w/tone wicker…?

    from the manual:
    The BMPTW requires a clean 9VDC power supply at 50mA. We recommend the Electro-Harmonix US96DC-200BI power supply.

    the original big muff pi power supply offers 9v @ 100ma… and the adapter ehx recommends is 9.6v @ 200 ma (US96DC-200BI) … is it just me or does the adapter for the original big muff pi seem closer to the spec ehx describes the BMPTW needs…?

    just wondering if i need to get another power supply or not for the BMPTW…

    thanks for the help on this!

    April 29, 2009 at 8:37 pm #96188
    julian
    Moderator

    yes you may

    April 29, 2009 at 10:34 pm #96190
    Ned Flanders
    Moderator

    Yes but you’l need a converter to convert the plug, on the NYC muff it uses a 1/8 male jack. on the wicker it uses a 2.1mm barrel connector like boss.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.