Home › Forums › Help/Technical Questions › Big Muff integrated in DAW

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • March 14, 2010 at 9:19 am #80037
    matthiasmax
    Member

    Hi there,

    I bought a Big Muff one or two years ago and always fail to get high output gain from the device when connected to my DAW.
    I go right from the AD/DA converter (ADAT) through a cable with standard jack directly into the Big Muff and back. It’s always very low level around -10 to -6 dB.

    How do you plug your Muff to your computers?

    Thanks

    March 14, 2010 at 5:31 pm #108503
    ChromeClone
    Participant

    never used an adat, but are you using amp modeling on your computer?

    March 14, 2010 at 6:39 pm #108506
    matthiasmax
    Member

    Hi,
    it doesn’t matter that I use an ADAT converter. The thing is that the Muff delivers a lower input signal than the input signal was…. Do you know what I mean?

    Thanks!

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.