Home › Forums › Help/Technical Questions › big muf tone wicker pot replacement

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • April 25, 2017 at 10:59 am #84870
    corvax
    Participant

    Hi,

    It turned out that I need to replace sustain pot in my unit. I’ve already found out it should be 24mm 100k LOG pot, but there is no info about power. Is 0,25 W ok to attain the original spec?

    Help me Im a noob and despaired :D

    April 25, 2017 at 11:44 am #122813
    corvax
    Participant

    Will this one’ll fit ?:)

    April 25, 2017 at 3:51 pm #122814
    Flick (EHX Staff)
    Moderator

    You have the potentiometer value correct — 100k/LOG — but not the physical size. The Tone Wicker’s Sustain pot has a 16mm diameter. An exact replacement pot can be found for sale at Small Bear Electronics:

    http://smallbear-electronics.mybigcommerce.com/16mm-right-angle-pc-mount-song-huei-16k6-series/

    Choose 100K Audio from the pull-down menu.

    April 29, 2017 at 4:21 pm #122821
    corvax
    Participant

    Hi, thank you for reply! Are you 100% sure it’s 16? :) Everywhere I checked there was mentioned only 24 mm :)

    May 1, 2017 at 1:02 pm #122823
    Flick (EHX Staff)
    Moderator
    Quote:
    Hi, thank you for reply! Are you 100% sure it’s 16? :) Everywhere I checked there was mentioned only 24 mm :)

    I am sure it is a 16mm pot. Where did you see that the Tone Wicker has 24mm pots? The NYC Big Muff uses 24mm pots but not the Tone Wicker.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.