- This topic has 7 replies, 4 voices, and was last updated 14 years, 7 months ago by .
Viewing 8 posts - 1 through 8 (of 8 total)
Viewing 8 posts - 1 through 8 (of 8 total)
- You must be logged in to reply to this topic.
Home › Forums › Help/Technical Questions › Big Box Pog Daisy Chaining
hey chaps
im lookin to daisy chain my big box pog i got but my chain plugs dont fit in the pog power input
is there an adaptor? is it possible to even daisy chain it on the typical 9v boss type chain of pedals
i picked it up in the u.s but im in australia now
any ideas
cheers!
I think the original POG used an 18v power supply, so you wouldn’t be able to chain it on a 9v.
I’m pretty sure you need 18v dc 500ma and the unit should say if it’s center positive or negative.
would an australian 18v dc 500ma plug work? and is it 2.1mm or 2.5mm?
If the plug is the right size and the polarity is right. I want to say that the POG is reverse polarity and 2.1 mm, but I’m not 100% sure!
does anyone have mikes number? ill just call and ask the man haha
im seriously confused on what to do
what symbol does it have in the unit next to the input?
a typical pedal is 2.1mm, so if you have a daisy chain or a ‘regular’ adapter see if it fits (without anything turned on)
if so then you want 2.1mm ……
so see if it’s center negative or positive (little picture on the unit near the power input) then check the size of the pin (with your daisy chain or boss psu or whatever) then order a AUS 18v dc 500ma
nah my normal chain plugs dont fit so im guessing its 2.5mm insted like the line 6 peds
the adaptor says its center positive
so summing it up id need a
18v dc 500ma center positive 2.5mm power supply?
p.s thanks for helping guys
This is what you’ll need:
18V/500mA (center positive) 2.1mm Barrel.
http://www.buyanalogman.com/product_p/eh-18dc-500.htm
Edit: Australia requires a 230/240V version. Analogman
should be able to help.