Home › Forums › Help/Technical Questions › Battery lead detached from big muff

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • January 15, 2011 at 8:32 pm #81241
    keatsy91
    Member

    Hi all
    I recently found out my battery lead has detached from its attachment inside my Big Muff. does anyone know where it should be re soldered to??i have tried soldering it to the ac adapter peg and to the instrument in peg with no luck.
    any help will be gratefully received

    chris

    January 15, 2011 at 8:41 pm #113795
    astrozombie
    Participant
    Quote:
    Hi all
    I recently found out my battery lead has detached from its attachment inside my Big Muff. does anyone know where it should be re soldered to??i have tried soldering it to the ac adapter peg and to the instrument in peg with no luck.
    any help will be gratefully received

    chris

    its a big muff pi right? ill take a photo of mine in a bit.

    January 15, 2011 at 8:53 pm #113796
    The EH Man
    Moderator

    The red or black lead?

    January 16, 2011 at 9:52 am #113805
    keatsy91
    Member

    its the read lead on the big muff pi

    January 16, 2011 at 1:32 pm #113811
    The EH Man
    Moderator

    It should go the AC adapter jack. It would be the leg with solder and no wire on it.

    January 16, 2011 at 5:05 pm #113814
    keatsy91
    Member

    cool, ill give that a try and see if it works
    thanks
    chris

    February 26, 2011 at 11:54 pm #114493
    warsaw
    Member

    Funny I just had the same problem, but both leads detached. I actually know where the red lead goes, but I need to know where the black battery lead goes. I included a pic of the board, could you show me where to connect the black lead? thanks.

    February 27, 2011 at 2:04 am #114494
    The EH Man
    Moderator
    Quote:
    Funny I just had the same problem, but both leads detached. I actually know where the red lead goes, but I need to know where the black battery lead goes. I included a pic of the board, could you show me where to connect the black lead? thanks.

    It goes to the lug on the input jack that has solder but no wire.

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.