Home › Forums › Help/Technical Questions › Bass balls and Bass Blogger help!

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • August 15, 2011 at 2:23 pm #81835
    mcgaxs
    Member

    Hey Guys

    I can’t get my bass balls or bass blogger pedal to work in series with one and other. when both are connected only one will work but both have to be switched on to get any effect at all. also when i try connecting either pedal to my akai miniak synth nothing comes through when either are switched on but dry synth will come through when they are switched off.

    Any help would be greatly appreciated

    August 15, 2011 at 2:50 pm #115751
    The EH Man
    Moderator

    Are they connected to the same power supply?

    Reading the Blogger manual gives you this info:

    IMPORTANT PLEASE READ: The Bass Blogger will not work with the same power adaptor that is daisy chained to other pedals in its signal chain. Please run the Bass Blogger off of its own power adapter or a battery. The battery will last a long time.

    August 15, 2011 at 2:53 pm #115752
    mcgaxs
    Member

    No they are both running off fresh batteries. also it even happens when i have one pedal connected to the amps send/return and another connected pre input.

    August 15, 2011 at 7:29 pm #115754
    Cryabetes
    Participant

    does the miniak work with just one of the pedals?
    I mean, let’s make an exhaustive chart of what does/doesn’t work for this
    Fill this in with what does/doesn’t work: [note: these aren’t all the combinations…]
    Bass + Amp =
    Bass + Bassballs + Amp =
    Bass + Blogger + Amp =
    Bass + Bassballs + Blogger + Amp =
    Bass + Blogger + Bassballs + Amp =
    Bass + Bassballs + Amp + FXLoop(Blogger) =
    Bass + Blogger + Amp + FXLoop(BassBalls) =
    Synth + Amp =
    Synth + Bassballs + Amp =
    Synth + Blogger + Amp =
    Synth + Bassballs + Blogger + Amp =
    Synth + Blogger + Bassballs + Amp =
    Synth + Bassballs + Amp + FXLoop(Blogger) =
    Synth + Blogger + Amp + FXLoop(Bassballs) =
    Synth + Leftout(Bassballs) + Rightout(Blogger) + Amp =

    August 15, 2011 at 7:51 pm #115755
    mcgaxs
    Member

    Fill this in with what does/doesn’t work: [note: these aren’t all the combinations…]
    Bass + Amp = yes
    Bass + Bassballs + Amp = yes
    Bass + Blogger + Amp = yes
    Bass + Bassballs + Blogger + Amp = yes (reduced volume however)
    Bass + Blogger + Bassballs + Amp = yes (reduced volume however)
    Bass + Bassballs + Amp + FXLoop(Blogger) = yes (however with distortion enabled on on bassballs and fuzz on blogger load pulses are heard)
    Bass + Blogger + Amp + FXLoop(BassBalls) = yes (however with distortion enabled on on bassballs and fuzz on blogger load pulses are heard)
    Synth + Amp = yes
    Synth + Bassballs + Amp = no sound when pedal is on, sound when not
    Synth + Blogger + Amp = no sound when pedal is on, sound when not
    Synth + Bassballs + Blogger + Amp = no sound when pedal(s) is on, sound when not
    Synth + Blogger + Bassballs + Amp = no sound when pedal(s) is on, sound when not
    Synth + Bassballs + Amp + FXLoop(Blogger) = dont know
    Synth + Blogger + Amp + FXLoop(Bassballs) = dont know
    Synth + Leftout(Bassballs) + Rightout(Blogger) + Amp = dont know

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.