Home › Forums › Help/Technical Questions › B9 through a separate amp

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • December 10, 2016 at 3:43 am #84695
    Troy
    Member

    I run my B9 first on my pedal board with the dry out going to my other pedals and the organ out going to separate amp. When I turn the dry volume down on the B9 I still get a dry guitar signal through the amp the is getting the organ out only. Is there a way to stop this?

    December 10, 2016 at 4:43 am #122333
    EHX STAFF
    Keymaster

    Hi Troy
    Check this out:
    https://www.ehx.com/forums/viewthread/8078/

    December 11, 2016 at 9:03 am #122335
    Troy
    Member

    Thank you. That was very helpful.

    August 20, 2022 at 4:52 pm #192385
    mlebofsky
    Participant

    Link is bad. I am having the same issue.
    When I turn the dry volume down on the B9 I still get a dry guitar signal through organ output. Is there a way to stop this?

    August 22, 2022 at 9:18 am #192389
    EHX STAFF
    Keymaster

    Here is the link on the wayback machine

    https://web.archive.org/web/20170714110424/https://www.ehx.com/forums/viewthread/8078/

    On the newer units, there is an internal switch to send outs differently. You unit if newer may have this.
    Please write the techs at info@ehx.com

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.