Accoustic feedback with new Voice-Box – Electro-Harmonix

This topic has 1 reply, 2 voices, and was last updated 15 years, 5 months ago by julian.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
June 12, 2009 at 2:52 pm #78399

tombass
Member

Hi, I’m Tom from Berlin/Germany. I’ve just bought the new Voice-Box. It is connected with
a keyboard and the line-out goes into a power-mixer. The other input is plugged in, of course, with a mike ( Shure SM58 ). This is connected with another channel of the power-mixer. If the voice box is switched on, everything works fine, but as soon as you press the bypass switch you have an awful feedback from the mike, so that you have to turn the volume down. Did I do something wrong?
Greetings from Berlin, Tom

June 12, 2009 at 3:47 pm #97801

julian
Moderator

I don’t have one yet, but it doesn’t sound like you’re doing anything wrong. I’d just try the typical anti-feedback procedures- repositioning the mic, maybe working the EQ a bit on the mixer, etc.

After that, I’d play with the mic gain switch on the Voice Box.
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.