Home › Forums › Help/Technical Questions › About the power jack on EHX 24v pedals

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • October 8, 2016 at 2:03 pm #84609
    Ytre
    Member

    Hi,

    I learned the hard way that only an original EHX power supply will fit into the DMMxo power jack.

    Does every other 24v pedal from EHX has the same issue? (Worm xo, ..)

    October 8, 2016 at 3:13 pm #122115
    EHX STAFF
    Keymaster

    Yes but not the other way around.
    its important you mark your supplies.
    We have since moved away from this and just do the 9 volt supplies.

    October 8, 2016 at 6:20 pm #122119
    Ytre
    Member
    Quote:
    Yes but not the other way around.
    its important you mark your supplies.
    We have since moved away from this and just do the 9 volt supplies.

    The problem is I have to use an original EHX supply, because if I try to use any other 24v adaptor the jack will not fit. It just happened to me with a DMMxo, and I wondered if all the other 24v pedals also have a smaller jack, so you can’t use other adaptor.

    January 23, 2017 at 8:01 am #122527
    HansUrmann
    Member
    Quote:
    …if I try to use any other 24v adaptor the jack will not fit.

    Most of new power adaptors uses DC plug 5.5*2.1mm, but in 24v-adaptors from EHX is used DC plug 5.5*2.5mm.
    My customers have no problems with that low noise power supply
    Power Supply by HansUrmann (24v/100mA)

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.