Home › Forums › Help/Technical Questions › 2880 Power Supply

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • June 10, 2009 at 3:21 am #78380
    kagakuninja
    Member

    I was sold a 2880 that is missing the power supply. The manual does not list the polarity of the plug (note to EH: rather than dire warnings about using a wrong supply, you could provide complete technical information in the manual).

    I’ve read the forums, and it appears that the 2880 uses the same power supply as the HOG and 16 second delay, which is 9VDC 500ma center positive. Can someone confirm this? I think I have some Moog wall warts with the correct amperage.

    -steve

    June 10, 2009 at 4:25 am #97628
    bill ruppert
    Participant

    The proper supply shipped with the 2880 is:
    9 volts DC
    500mA, center conductor is positive and the outside barrel is negative polarity.

    Yes, it is the very same supply used on the HOG, 16 Second Delay and the Holiest Grail Reverb.

    June 10, 2009 at 5:26 am #97630
    kagakuninja
    Member

    …and it uses a non-standard connector. Thanks a lot EH. Hopefully the seller will cough up a usable power supply.

    June 10, 2009 at 1:31 pm #97647
    julian
    Moderator

    Actually, those are standard for center positive pedals. My reverse polarity cable that came with my PP2+ fits my HOG perfectly, and it was designed in general for reverse polarity pedals.

    If he doesn’t send an adapter, you can buy one here:
    http://www.buyanalogman.com/product_p/eh 9ldc-500.htm

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.