Home › Forums › Help/Technical Questions › 22500 looper memory issue

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • April 3, 2017 at 2:54 pm #84840
    jjeacock
    Member

    Hi,

    I have previously stored loops no problem however, recently when i record loops i only get the blinking memory light and can’t work out how store the loop I’ve recorded to make the light solid. Once i change the bank or settings my loops are lost, feel like I’ve tried everything but open to suggestions.

    I’ve checked the manual in case i’m being stupid but can’t find anything relevant.

    Help please! :)

    John

    April 3, 2017 at 6:14 pm #122736
    EHX STAFF
    Keymaster

    Sorry John
    This sounds like a problem with the 22500? Are the loops playing back after you record them? There really is no store procedure in the 22500, once you record a loop and the MEM LED begins blinking the loop audio is stored on the SD Card automatically. The blinking MEM LED indicates that an UNDO or REDO is available.

    April 3, 2017 at 6:26 pm #122737
    jjeacock
    Member

    Thanks for the quick response,

    The audio records and plays back fine, but disappears once i change the bank.
    Although strangely the first loop i recorded (when it was storing ok) is still stored and working as it should.

    I have not updated the firmware since buying, should i consider installing that and formatting the SD card?

    John

    April 3, 2017 at 7:51 pm #122738
    EHX STAFF
    Keymaster

    John
    Yes I would upgrade the firmware and reformat the card first.
    Also make sure you are using the adapter that came with the pedal. It draws a little more current than the other pedals.

    November 2, 2018 at 8:17 pm #124490
    jsxosc
    Member

    Hi, for what I read in this thread I think something similar happened to my unit these days.
    I just discovered that if I record loops A and/or B in specifically bank 19, they are authomatically deleted when I change bank and I come back to #19.
    i tried several times and this happens always, only in this bank apparently (I didn’t go through aaaalll of the other Banks…).
    Is it anything that I could do? reformating the SD card -probably the only thing I can do by myself…-?

    Thanks

    November 3, 2018 at 7:50 pm #124495
    jsxosc
    Member

    Hi again, just by following some advice in other threads, I repaired the SD card in a PC and now the 22500 is apparently working well -interestingly the card was not seen as fautful by the computer, but I repaired anyway and problema solved-.
    Nevertheless -I forgot to mention in my previous message- the left cannel clip led keeps being always lit, like now with nothing plugged into the looper but the usb connection to the computer. I hope it has no further effect… just should not be lit.

    I hope this is useful for someone else, and let’s see what the left clip led does in the near future…

    Cheers

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.