Home › Forums › Help/Technical Questions › 16 second delay power question …. confusion.!

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • August 5, 2009 at 1:58 am #78720
    looptheloop
    Member

    hi there i have a reissue 16 second delay (white sliders) – recently i saw one on ebay where the guy was saying it comes with the proper 18v (!) power supply? im 100% sure my power supply is 9 volt am i running the thing on the wrong psu or what :)?

    August 5, 2009 at 2:14 am #100303
    The EH Man
    Moderator

    His error. It came with the US9LDC-500.

    August 29, 2009 at 3:25 pm #101013
    Stoner Wizard
    Participant
    Quote:
    hi there i have a reissue 16 second delay (white sliders) – recently i saw one on ebay where the guy was saying it comes with the proper 18v (!) power supply? im 100% sure my power supply is 9 volt am i running the thing on the wrong psu or what :)?

    Hello:

    Do you refer to this one or similar?:

    http://www.pentagoncity.us/ebay/16sec.jpg

    The power supply on the pic is 18 volt DC/500 mA (the one used for EH Holier Grail or EH POG among others).

    I’ve won this EH 16SDD yesterday. Looks fine but …

    … if a 18 DC volt power supply is plugged to a 9 volt device, despite both they have 500 mA the most probable thing is the pedal malfunctions or gets damaged, am I right?.

    In this case I don’t mind because I have a 9 replacement volt/500 mA for the 16SDD, and I don’t want to take unnecessary risks.

    Thank you very much.

    Nacho

    September 3, 2009 at 7:06 pm #101152
    Stoner Wizard
    Participant

    Hello again:

    As I suspected initially, the power supply I mentioned at my previous post is not accurate for the 16SDD. After exchanging some e-mails with the seller, he noticed the mistake and will send me an additional 9V DC/500 mA for free (same as Holy Grail) for the 16 SDD.

    The pedal is on the way with the “wrong” 18V DC/500 mA, which will be useful as a replacement for my other EH big boxes like POG and Holier Grail.

    In my case, I’ll have to use a plug adapter (USA -> European standard) plus the voltage transformer (USA -> European), but that’s okay to me…

    … if I became lucky and go touring to USA, … just take my bunch of USA power supplies (most of my recent EH army came from USA eBayers) and hit the road!

    Regards to everybody!

    Nacho

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.