- This topic has 2 replies, 2 voices, and was last updated 3 years, 11 months ago by .
Viewing 3 posts - 1 through 3 (of 3 total)
Viewing 3 posts - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.
Home › Forums › Help/Technical Questions › Q: Cockfight “fuzz thru” PCB dipswitch?
I’m looking for a dipswitch on the PCB of a Cockfight pedal. According to the manual:
On the PCB there is a small DIP switch that changes
FUZZ OFF to FUZZ THROUGH mode. In FUZZ THROUGH mode the filter section
is bypassed and removed from the signal path. In this mode the knobs FREQ,
BOTTOM and switch CRY/TALK have no effect on the sound.
Here’s a pic: https://ibb.co/Db1wTRn
Let me know if you can find it. Thanks
On the PCB there is a small DIP switch that changes
FUZZ OFF to FUZZ THROUGH mode. In FUZZ THROUGH mode the filter section
is bypassed and removed from the signal path. In this mode the knobs FREQ,
BOTTOM and switch CRY/TALK have no effect on the sound.
Here’s a pic: https://ibb.co/Db1wTRn
Let me know if you can find it. Thanks
If I remember correctly, early versions of the Cock Fight did not have this option.
You’re correct. EHX customer support emailed me the following response: