Home › Forums › Help/Technical Questions › Switchblade pro to switch amp input

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • April 14, 2020 at 3:53 pm #86212
    Cedleader
    Participant

    Hello! Is it possible to use the switchblade pro to switch high and low input of a jcm 800?

    Thank you

    April 15, 2020 at 12:19 am #125994
    EHX STAFF
    Keymaster

    Yes you could but I am not sure how the two inputs on the Marshall are wired. If its separate discreet channels yes

    In other words I am not sure what happens when both inputs are used at once.

    April 15, 2020 at 10:34 am #125995
    Cedleader
    Participant

    Thank you for the answer. I tested this today with a studio classic and it doesn’t work. There is only the sound on low input which works. No matter, I don’t bought this pedal for this :)

    April 16, 2020 at 2:50 pm #125999
    EHX STAFF
    Keymaster

    Yes than they are not separate channels but a jack that adds resistance to lower the input.
    You could try the Signal Pad pedal. This way you would plug in the high sen input and turn the pad pedal on for the lower sensitivity.

    Signal Pad

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.