Home › Forums › The Lounge › Mel9…

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • August 25, 2019 at 1:43 pm #85942
    JimB
    Member

    Are there any plans to make a midi version of the Mel9? It is a fantastic Pedal, though it could do with a Tremolo/rate control…and Stereo – although I realise the original Mellotron was Mono. I have 3 in my rack with different settings, and would ideally like to have presets via Midi

    October 14, 2019 at 11:59 pm #125567
    waynereed
    Member

    I just bought a Key9, B9 and Mel9. 2 issues I could use some help with.
    1). Guitar into Mel9 (or any of them, same issue) dry out to pedal board, effect out to PA. No sound goes to my amp from pedal board. Both guitar and pedal play thru PA. Checked and no signal is going to the board. Tried my tuner, shows no signal. I thought the dry out would
    go to my guitar amp or board and play thru that. I tried different dry/wet settings on the pedal. No change. I’d hoped my guitar would come out of my amp and the Mel9 out of the PA.

    2). How do you connect multiple “9” pedals so I end up with dry to amp, effects to PA? I get the 1st pedal. Guitar in, then . . . which out do I use to go into the 1 in on next pedal?

    TIA! Wayne thenettrainer@yahoo.com

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.