Home › Forums › Help/Technical Questions › Hum Debugger Voltage

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • February 6, 2019 at 11:16 pm #85881
    electrojim
    Member

    Hello. I have a Truetone 1 SPOT PRO CS12. This pedal board power supply has a 9v AC Isolated output. Can the 7.5 AC volt designed Hum Debugger take the 9v AC and operate as intended?

    Thanks

    February 7, 2019 at 6:13 am #124805
    gvelasco
    Participant

    No. The Hum Debugger power supply is VERY SPECIAL. It is actually part of the circuit. The power supply has the sensors in it that tell the Hum Debugger the specific sounds that it needs to subtract from the signal.

    When you buy a used Hum Debugger, like from eBay, you need to make sure it comes with the original power supply. You can buy a replacement power supply, but they’re not cheap.

    You can try a search for it, or you can send a note to info@ehx.com and they might be able to tell you where you can order one.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.