Quote:
I can’t get my 95000 looper to let me stack loops on tracks 1 and 2. Tracks 3-6 work fine. Am I missing something?
Check the overdub setting for tracks 1 and 2:
1. Make sure the LOOP/DUB LED is lit underneath the display.
2. Press the Track 1 button located between Track 1’s Pan knob and Fader.
3. Check the right two digits of the display, what number does it show? If it shows a number less than 10 then when you overdub onto Track 1, the previous loop audio will reduce in volume with each cycle of the loop.
4. To set the DUB setting to 10, press and release the VALUE knob so that the dot to the right of the two DUB digits is lit.
5. Rotate VALUE clockwise until it displays 10.
6. Repeat the same procedure for Track 2 starting with Step 2 above.
