Home › Forums › Help/Technical Questions › Locating latest software version for 95000

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • January 14, 2019 at 9:20 pm #85637
    Duffy
    Member

    I am on the products/95000 page and can’t find a link to software upgrade, version or anything like it. Help please.

    One more question, is it possible to save a track to a different location, so I can save loops using the #1-20 drum loops?

    January 15, 2019 at 3:08 pm #124714
    Flick (EHX Staff)
    Moderator

    Here’s a temporary link to the latest 95000 firmware update, v 1.13. We will be posting on the 95000 product page in the near future:

    https://www.dropbox.com/s/rev3hptdzqdejhh/LF1NY22.zip?dl=0

    You cannot copy and paste tracks/loops to other locations on the 95000 itself. To save tracks/loops to other locations, you have to do it with a computer. You would connect the 95000 to your computer with a USB cable (or remove the micro SD card from the 95000 and use your computer’s card slot if it has one) and then copy and paste the folders and files as yo use fit.

    April 13, 2019 at 4:49 am #125095
    JC777
    Member

    Hi Flick,

    Is it possible yet with the latest version of the software/firmware update to do variable loop lengths?

    April 15, 2019 at 1:27 pm #125104
    Flick (EHX Staff)
    Moderator

    Each loop may be any length but each track within a loop is fixed to the loop length. Varying track lengths within one loop will not be possible on the 95000, even with software updates.

    August 28, 2019 at 6:01 pm #125483
    MARIOS
    Member

    Hi, can someone provide the link or instructions on how I can upgrade my 95000 looper to the newest version.

    —

    Also, when creating loops for guitar, after I play the last guitar chord & I stop the loop, when I play it back, the loop has a 2 second silence at the end of my last chord, it makes the loop sound like there is a break before it repeats the loop, I tried Quantize , & even that didn’t work either.

    —

    Is there a NEW UTUBE 95000 Looper video worth watching that can explain this procedure . I have created loops on other loopers, no problem.

    I have a feeling it’s my 95000 looper.

    —

    I’ve been waiting for day’s from a response from Electro Harmonix

    I would Appreciate some assistance.

    —

    Mario

    September 4, 2019 at 1:52 pm #125502
    Flick (EHX Staff)
    Moderator

    The latest 95000 firmware is version 1.14 and can downloaded directly from this link:

    https://www.ehx.com/assets/ehx-95000-firmware-v1.14.zip

    The zip file includes instructions on how to update your 95000. You will need either a standard USB cable or a micro SD card reader.

    —

    What you are describing regarding the two seconds of silence is very strange. Do you hear the silence before you stop the loop and press play again?

    What is the overdub setting for your tracks? Make sure they are all set to 10. It’s possible you are overdubbing onto your track for a couple seconds before you stop loop playback. If the Overdub setting of the track is set to 0 then it will erase any audio that was previously recorded each time the loop cycles.

    September 12, 2019 at 1:34 pm #125522
    MARIOS
    Member

    What is the procedure to check the OVERDUB setting on a track on the 95000

    I want to make sure it’s on 10 , so i don’t get the extra 2 seconds of silence after i create a loop.

    September 12, 2019 at 1:56 pm #125523
    Flick (EHX Staff)
    Moderator

    Locate the PAGE button on the right side of the unit. Press PAGE until the LOOP/DUB LED is lit.

    The right two digits of the display will now show you the DUB setting for the currently selected track.

    Press the Track 1 select button, it should now be lit. The right two digits of the display show you the setting for Track 1’s DUB setting. The range is from 0 to 10.

    If you want to change the setting, press and release the VALUE knob. Now the dot to the right of the DUB setting should be lit. Turn the VALUE knob to change the DUB setting.

    Now press the Track 2 select button and check its setting. Repeat this procedure for the rest of the mono tracks and the Mixdown track

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.