Home › Forums › Help/Technical Questions › Can OD pedals handle less than 9v?

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • December 29, 2018 at 3:20 am #85610
    xkjacob.king
    Member

    Good evening, I hope the holidays find you well.

    I was wondering if OD pedals can handle lower than 9v.

    I have an mxr isocomp that let’s me dial down the voltage. I’ve played with the DOD gunslinger and it can handle anything at or under 18v. Dialing down the voltage is found on the Germanium OD and that’s a neat effect.

    If it isn’t recommended That’s fine. I have a small collection of EHX OD and thought this might be another avenue I could experiment with.

    Thanks

    December 30, 2018 at 4:53 pm #124670
    mahdi
    Member
    Quote:
    Good evening, I hope the holidays find you well.

    I was wondering if OD pedals can handle lower than 9v.

    I have an mxr isocomp that let’s me dial down the voltage. I’ve played with the DOD gunslinger and it can handle anything at or under 18v. Dialing down the voltage is found on the Germanium OD and that’s a neat effect.

    If it isn’t recommended That’s fine. I have a small collection of EHX OD and thought this might be another avenue I could experiment with.

    Thanks

    if a fuzz do then an od does too , and the best example would be the : Maestro FZ-1 , it was run on two batteries of 1.5v

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.