Home › Forums › Help/Technical Questions › 22500 stereo inputs mix (?)

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • October 16, 2018 at 6:38 pm #85513
    Nahuel
    Member

    Hi there guys

    I’m running all my pedals through the FX loops of my amp and my 22500 (36 firmware) at the end of the chain.

    My question is simple… I use both inputs of the pedal loop… The right input comes from my tremolo and my left input from my delay, so… Is there any way the pedal can mix both input signals into one output? If not… Which would be the best way to do it? since my amp has only one input for “FX return input”…

    Kind regards
    Nahuel

    October 16, 2018 at 7:55 pm #124400
    EHX STAFF
    Keymaster

    The best way is with a small mixer.
    But you can use the passive Switchblade+ to sum the two channels together.
    The only draw back being passive is there is a bit of a signal loss. Plus side is it has less noise being passive.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.