- This topic has 1 reply, 2 voices, and was last updated 7 years, 8 months ago by .
Viewing 2 posts - 1 through 2 (of 2 total)
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.
Home › Forums › Vintage EHX › Older Holy Grail Problem
So today I got my Holy Grail in the mail today, it’s one of the older big box ones and I noticed it needs the 3.5mm converter for my 1spot to connect so I got that all setup. I read a few people online say that they had problems with noise but I didn’t notice anything however any time I would turn the pedal off or turn a pedal next to it on or off the whole signal would cut out and I would have to jiggle the pedal around to get the signal to come back through. I tested all of my cables and the Holy Grail seemed to be the problem. I know that they use a different adapter than most pedals but I haven’t gotten a chance to get one yet. Was the 1spot the problem? Did I permanently damage the pedal? Or is it something else that might need to be fixed?
Thanks!
EDIT: If it helps, my current pedal order is TU-3 -> RAT 2 -> Crybaby -> Turbo RAT -> Phase 90 -> Holy Grail -> DD-7
If I recall correctly, my old Holy Grail unit preferred a 9v 100mA supply over the 9v 500mA supply. I know that doesn’t make much sense, but such is the case.