Home › Forums › Help/Technical Questions › Cock Fight mod

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • May 6, 2016 at 6:04 pm #84382
    shantiano
    Member

    Hi,

    Anyone knows how to mod the Cock Fight to allow using the fuzz independently?
    Thanks.

    Best,
    Shant

    May 6, 2016 at 6:27 pm #121500
    EHX STAFF
    Keymaster

    You can set the controls so the wah is near flat or out of the circuit.
    Start here with the settings

    Volume 1 o’clock
    Frequency all the way up
    Tone 9 O clock
    Drive 0
    Bottom 2 oclock
    Bias all the way up

    September 6, 2017 at 7:40 am #123120
    shantiano
    Member

    The Manual mentions:

    FUZZ ON/OFF Switch – On the PCB there is a small DIP switch that changes
    FUZZ OFF to FUZZ THROUGH mode. In FUZZ THROUGH mode the filter section
    is bypassed and removed from the signal path. In this mode the knobs FREQ,
    BOTTOM and switch CRY/TALK have no effect on the sound.

    Does this mean that the FUZZ can be used independently in this mode?

    Thanks.

    September 6, 2017 at 4:02 pm #123125
    EHX STAFF
    Keymaster

    Recent production boards have this new internal switch in which you can use the fuzz with out the wah.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.