Home › Forums › Help/Technical Questions › dmmtt1100 power supply question

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • April 10, 2016 at 2:51 pm #84342
    mikes66
    Member

    I have the tt1100 and use a mc403 power supply
    Unfortunately 9v power only supplies 80ma and the dmmtt1100 requires 200ma.
    I don’t want to use the big wall wart that came with it.
    My question is, can I use a strymon damage control power supply that is 9v 600ma. It is smaller and can fit better on my power strip under my board.

    April 10, 2016 at 6:10 pm #121423
    EHX STAFF
    Keymaster

    Sure if the voltage and polarity are correct.
    Check for ground loop noise.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.